Angebot!

Modular Soap Holder: Magnetic and with brackets for Hymer

Preisspanne: €15.58 bis €16.88

Artikelnummer: HYM-SOAP-MAG Kategorie: Schlagwort:

Beschreibung

Modular Soap Holder: Magnetic and with brackets for Hymer

One holder, two ways to mount it. Magnets for the steel outside of the van. Brackets that clip onto the Hymer kitchen rail inside. No drilling either way.

Made in SwitzerlandMagnetic or Hymer brackets10 kg pull per magnetShips in 48 working hours

Use it for: Keep shampoo and soap off the muddy ground during an outdoor shower, or clip it onto the Hymer kitchen rail inside for soap and sponge.

What it fits: Magnetic version: steel body panels, 10 kg pull per rubber-coated magnet, not aluminium. Bracket version: Hymer kitchen rail, no tools. Interior 130 x 70 mm, height 42 to 82 mm.

Shipping: Ships within 48 working hours. Free shipping from CHF150, £150, €250 or $299.

Two mounts. One holder.

Outside, it holds shampoo and soap off the muddy ground during an outdoor shower. Inside, it clips onto the Hymer kitchen rail and keeps soap and sponge where you use them. Choose the mounting when you order.

Mount one

Magnetic

Rubber-coated magnets. Attaches to any steel body panel in seconds. Off again when you are done.

Mount two

Hymer brackets

Clips onto the kitchen rail. Slide it along the rail or take it off whenever you want. No tools.

Capacity

Sized for standard bottles

Shampoo, conditioner, soap, sunscreen and travel sizes. Interior height adjusts from 42 mm to 82 mm.

Build

Carbon fibre reinforced nylon

3D-printed and hand-finished in our Swiss workshop.

Ordering

Select “With Hymer brackets” in the variant picker above to add the brackets to your order.

Where each version works

Magnetic version

Steel body panels — this is most vans
Flat, clean, bare-painted steel
Aluminium panels — no magnet holds on aluminium
Curved or ribbed areas — any air gap costs hold force

Bracket version

Hymer kitchen rail — clips on, no tools
Removable and repositionable along the rail
Check your vehicle

Select your make and model in the compatibility tool.

Interior dimensions

Length130 mm — 5.12 in
Depth70 mm — 2.76 in
Minimum height42 mm — 1.65 in
Maximum height82 mm — 3.23 in
Will my bottles fit?

The holder takes most standard travel and full-size shampoo bottles. Measure the width and height of your bottle against the interior dimensions above. Contact us if you want us to check it with you.

Specifications

MountingMagnetic, or brackets for the Hymer kitchen rail
Hold force10 kg per magnet, tested
MagnetsRubber-coated, to protect the paint
MaterialCarbon fibre reinforced nylon, 3D-printed
InstallNo tools, no drilling. Reversible.
Spare partsEvery part replaceable — you never re-buy the kit
OriginDesigned, produced and hand-assembled in Switzerland
How it is made

3D-printed, not injection moulded. Minor visible layers or slight waviness come with the process. Anything with a noticeable defect is separated out and never shipped.

Pair and save

  • Complete Shower Kit (3-piece) — shower head holder, shampoo holder and towel holder. The full outdoor bathroom.
  • Shower Bundle (2-piece) — shower head holder and towel hook. Add this holder to complete the set.
The rest of the outdoor bathroom

Magnetic Shower Mount · Magnetic Towel Hook · Magnetic Shower Gel Holder · Shower Curtain Holder

The original. Invented here.

Tactic Engineering invented the magnetic vehicle mount. Designed and prototyped in Switzerland, stress-tested on the road, first units shipped in December 2021. Every magnetic mount on the market today came after ours.

Sold worldwide through

Burkhart Engineering Germany
Hobus Belgium
Dutch Van Parts Netherlands
Montpellier 4×4 France
Van Creed Australia
Nirvana Outfitters Canada

Shipping, duties and warranty

DispatchWithin 48 working hours from our Swiss facility
SwitzerlandSwiss VAT included in the displayed price
European UnionEU VAT and duties included — nothing to pay on delivery
Other countriesDisplayed price excludes local taxes, collected at delivery
Warranty2 years, worldwide.
Spare partsEvery part replaceable at fair prices

Legal notice: under Swiss regulation, magnetic supports are classified as cargo securing equipment, for which the driver is responsible. Tactic Engineering cannot be held accountable for any incident resulting from the use of our products. It is the user’s responsibility to comply with local regulations on cargo securing. Use the magnetic supports responsibly.

Hymer is a trademark of Hymer GmbH & Co. KG. Tactic Engineering is an independent manufacturer and is not affiliated with, endorsed by, or sponsored by Hymer.

Compatibility at a glance

Vehicle or item Fit
Steel body panels (most vans), magnetic version Yes
Hymer kitchen rail, bracket version Yes
Aluminium panels No
Bottles up to 130 x 70 mm, 42 to 82 mm high Yes

FAQ

Magnets or brackets?

Pick magnets to hold shampoo and soap on the steel outside of the van during an outdoor shower. Pick „With Hymer brackets“ to clip it onto the Hymer kitchen rail inside. No tools and no drilling either way.

Will my bottles fit?

The inside measures 130 mm long and 70 mm deep, and the height adjusts from 42 mm to 82 mm. That takes most standard travel and full-size shampoo bottles.

Will it hold on my vehicle?

The magnet needs steel underneath. It holds on steel panels and does not hold on aluminium. Not sure? Put a fridge magnet on the spot first: if it sticks firmly, the mount holds.

How fast does it ship, and is shipping free?

Orders leave our Swiss facility within 48 working hours. Shipping is free from CHF 150 in Switzerland and £150 in the UK, and from €250 in the EU and $299 in the US.

Quick questions

Which bottles fit?

Most standard travel and full-size shampoo bottles. Check your bottle against the interior: 130 mm long, 70 mm deep, height adjustable from 42 to 82 mm.

Pairs well with

  • Magnetic Shower Mount
  • Magnetic Towel Hook

Zusätzliche Informationen

Gewicht 0.45 kg
Mounting

Magnets (outdoor shampoo holder), Magnets + Hymer Bracket (outdoor shampoo and kitchen accessories mount)