Angebot!

Renault Master 2024+ Phone Mount

Preisspanne: €22.40 bis €24.08

Artikelnummer: TE-MASTER24-MS-LHD Kategorie: Schlagwort:

Beschreibung

Renault Master 2024+ Phone Mount

Made for one dashboard. It sits in the moulded tray on the driver side of the Master, left of the steering wheel. No drilling. No adhesive. No vent clip. Pick the head that fits the gear you already own.

Made in Switzerland
Qi2.2 charger, up to 25 W
No drilling. No adhesive.
Installed in 60 seconds

At a glance

Use it for

Keep your phone in view in the Master, charging over Qi2.2 MagSafe up to 25 W, with a ball joint and knurled grip to set the angle.

What it fits

Renault Master (2024+). Sits in the moulded tray left of the steering wheel, no drilling, no adhesive. LHD and RHD, select at checkout. Check it matches the product photos before ordering.

Shipping

Leaves our Swiss workshop within 48 working hours. Free shipping from CHF 150, £150, €250 or $299.

One base. Three heads.

Same vehicle-specific base. Three heads so the mount works with the gear you already own.

Qi2 charger included

MagSafe

A complete kit. Mount plus a Qi2.2 wireless charger, up to 25 W, with braided USB-C cable. Plug in, snap your phone on, drive.

Adapter only

Quad Lock

A plastic adapter we make in-house, fitting between our base and your existing Quad Lock MAG charger. You bring the Quad Lock head and case, sold separately by Quad Lock.

Universal cradle

RAM X-Grip

A spring-loaded RAM X-Grip cradle on our base. Grips any phone, with or without a case. No magnets, no wireless charging. The most secure hold for rough roads.

Built for your Master.

Made for your van

Shaped to the driver-side dashboard tray of the Master 2024+. The phone sits in your sight line, next to the instruments.

Designed in Switzerland

Engineered and manufactured in-house.

No drilling, no adhesive

Reversible install in 60 seconds. The dashboard stays as Renault built it.

2-year warranty

Spare parts always available.

Not sure which one? Find your fit.

iPhone 12+ (no case or Apple MagSafe case) MagSafe
Peak Design MagSafe case MagSafe
Quad Lock MAG case + already own the charger Quad Lock
Any phone, mechanical grip for rough roads RAM X-Grip

Fitment.

Fits the Renault Master from model year 2024, with the moulded tray on the driver side of the dashboard, left of the steering wheel, as shown in the product photos. Left-hand drive and right-hand drive are separate variants. Check that your dashboard matches the photo before ordering. Not sure? Send us a photo of your dashboard and we will confirm.

Specifications.

MagSafe variant. Master base with Qi2 charger
Charger standardQi2.2 wireless, up to 25 W
Power inputUSB-C PD, 30 W or stronger source for full speed
Magnet typeMagnetic Qi2 alignment
Quad Lock variant. Adapter only
Compatible withQuad Lock MAG Wireless Charging Head
Adapter materialSintered nylon
RAM variant. Universal cradle
CradleRAM X-Grip spring-loaded, 4-jaw
Phone compatibilityAny smartphone 60 to 95 mm wide, with or without case
ChargingNone (mechanical cradle)
Mount and install
Install typeSits in the driver-side dashboard tray
Tools requiredNone. Reversible in 60 seconds.
Mount body materialSintered nylon, vehicle-specific profile
OriginDesigned and manufactured in Switzerland

MagSafe and iPhone are trademarks of Apple Inc. Quad Lock is a trademark of Annex Products Pty Ltd. Peak Design is a trademark of Peak Design Ltd. RAM and X-Grip are trademarks of National Products Inc. Renault and Master are trademarks of Renault SAS. Tactic Engineering is an independent manufacturer and is not affiliated with, endorsed by, or sponsored by any of the above companies.

Compatibility at a glance

Vehicle or item Fit
Renault Master 2024+ Yes
Any other vehicle No

FAQ

Which charger or head do I get?

Two options on the same base: the MagSafe kit with a MagSafe-compatible Qi2.2 wireless charger (up to 25 W over USB-C, iPhone 12 and newer), or a Quad Lock adapter for your existing Quad Lock MAG wireless charging head, sold separately by Quad Lock.

Can I adjust the angle of my phone?

Yes. The ball joint lets you tilt the phone within its range to the angle you like, and the knurled nut gives more grip when you tighten it to lock the position.

Will it rattle or scratch my console?

No. A black rubber strip absorbs vibration, holds the base firmly in place without adhesive tape and stops plastic rubbing on plastic, so your interior stays as it left the factory.

How fast does it ship, and is shipping free?

Orders leave our Swiss facility within 48 working hours. Shipping is free from CHF 150 in Switzerland and £150 in the UK, and from €250 in the EU and $299 in the US.

Quick questions

Which phones work with the MagSafe head?

iPhone 12 and newer, or any Android phone with a MagSafe-compatible case up to 3 mm.

Pairs well with

  • 30W Mini USB-C Car Charger: Fast Charge for MagSafe Phone Mounts

Zusätzliche Informationen

Gewicht 0.32 kg
Driving Side

LHD, RHD

Head

MagSafe-compatible (charger included), Quad Lock adapter only – charger NOT included, RAM X-Grip cradle